CeraTek Medical Pouch Sealers
CeraTek™ medical pouch sealers include constant heat sealers, impulse sealers, and vacuum chamber hot bar pouch sealers.
SencorpWhite’s medical pouch sealers are 100% validatable and calibratable. All sealers are available with variable seal widths in 12” and 24” models. Table top versions are built on open back frames allowing front-to-back and lateral pass-through sealing. Pouch sealer features:
- Digital read-out of temperature, pressure, and dwell time
- Process alarms with lockout features for seal parameters
- External output ports for process control verification and calibration
- P-Series models have optional evacuation/gas flush capabilities
- ISO 11607 and CE compliant
- Most models come with sample IQ/OQ protocol documents
CeraTek Pouch Sealer Models include:
- AS/1
- AS/2
- IH/2
- P/2
- DDS/2
- MPK/2
The CeraTek 12-MPK/2 and 24-MPK/2 are the first constant heat sealer/cutter systems for medical pouches. These systems allow medical device manufacturers to combine medical pouch sealing and cutting processes into one step following sterilization. These constant heat sealers include a cut-off knife for trimming headers or excess material from a sealed pouch. The systems are CE and ISO 11607 compliant.
The 12-MPK/2 has a 12” long seal die and can accommodate up to an 11.5” wide pouch; the 24-MPK/2 has a 24” long seal die and can accommodate up to a 23.5” wide pouch. The cut-off knife and sealing die operate independently so the system can be operated as a sealer only, cutter only, or sealer/cutter. The minimum distance from the outer edge of the applied seal to the cut location is 0.25”.
CeraTek is a Trademark of SencorpWhite.